Product Name: Kontact Kleaner II

Item Number: SO17A

Description: Cleans oil, grease, dirt, condensation and moisture from circuit boards, precision instruments, oxygen equipment, controls, switches, motors and film. Can be used on the following plastics: Neoprene W, Buna N, Buna S, Silicone rubber, Butyl, Natural rubber, Thiokol FA, Hypalon 40, Viton A, Adiprene L, Nordel, Delrin resin, Zytel, Nylon, Teflon, PVC, Polyurethane. For other plastics test on inconspicuous spot first. Developed for the Radio, TV, Aeronautical and Communications industries. Contains materials with over 85% less ozone depleting potential than traditional circuit board cleaners.

Benefits: Fast drying, dries residue free, 26,000 volt dielectric strength, safe for most plastics, non-flammable, no flash point, no frost out, removes flusk, strong spray pattern, evaporates in 20 seconds. Kontact Kleaner II is so good that most companies eliminate safety solvent use (because of its danger to plastics) and use this product instead for both contact cleaning and safety solvent cleaning. It has a strong flushing action and has self-rinsing and strong cleaning action. It has no CFC’S and no other ozone depleters.

Where to Use: The outstanding property of this product is its strong solvent cleaning capability yet it is safe on most plastics. It is used in industrial operations, textile plants, steel plants, utility companies, line crew, sub stations, engine and motor rebuilders, food industry, aeronautical industry, appliance and electric motor repair, mining industry, and TV repair.

Applications: Recommended as a surface degreaser/cleaner to use on the following:

WARNING: Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store above temperatures of 120°F. KEEP OUT OF REACH OF CHILDREN.

Spill Or Leakage Procedures: Extinguish ignition or combustion sources. Keep up wind of spill. Stop leak. Aerosol cans when vented to atmospheric pressure through normal use, pose no disposal hazard.