Product Information Sheet

Product Name: K-Chem 2004 Safety Solvent

Item Number: SO101B

Description: This outstanding product is a quick-drying blend of solvents formulated for the removal of grease, oil, wax, ink, lint, dust, mold release agents, some adhesives, and light carbon deposits. The advanced chemistry combines the best performance attributes of typical chlorinated solvents with the low individual/environmental impact requirements of the modern industrial workplace. The non-chlorinated, nonflammable, nonconductive blend may be used to clean and degrease electric motors, automatic pinsetters, sewing machines, textile industry machines, printing presses, rollers, blankets, offset type, watch and clock parts, precision parts, condensers and coils, generators and starters, electrical and mechanical equipment, typewriters and other office machines. The low odor formulation leaves no residue and is compatible with many metals including most types of steel, galvanized steel, brass, copper, magnesium, nickel, tin plate, titanium, zinc and more and is safe for use on some plastics. With use of this product for regular maintenance and protection, fire hazards and losses are reduced, motor life is extended, down-time on equipment is reduced, and repair and replacement costs are minimized.

Directions:  GENERAL DEGREASING: Spray on and blow dry; spray on and wipe off; wipe on with brush or rag or use as an immersion cleaner and air dry parts. Wire brush and/or repeat application as necessary or appropriate. Product may be transferred to pressure sprayer if desired. Check to be sure all materials are solvent resistant before allowing product to be transferred to any container. ELECTRIC MOTORS: Motors may be cleaned and degreased while in operation by spraying solvent into openings. Smaller motors may be cleaned by immersion. After cleaning is accomplished, motor should be blown dry with compressed air and relubricated to protect bearings. ATTENTION: This product is safe for use on a wide variety of plastics including most used in contact and circuit board construction. However, it may affect certain types of plastics such as PVC, ABS, styrenes, polycarbonates, and more. If unsure of material construction or compatibility, always test in an inconspicuous area prior to use.

DANGER: 

Contains Aliphatic Petroleum Distillate and 1-Bromopropane. Harmful or fatal if swallowed. Do not take internally. If swallowed, do not induce vomiting. Call physician immediately. Eye and skin irritant. Avoid contact with skin and eyes. If eye contact occurs, flush with water for 15 minutes. If irritation persists, consult a physician. If skin contact occurs, remove contaminated clothing. Wash with soap and warm water. If irritation persists, consult a physician. Vapor may be harmful. May irritate respiratory tract. Use with adequate ventilation. Avoid prolonged or repeated breathing of vapors. If overcome by fumes, remove victim to fresh air. Resuscitate if necessary. Get medical attention. Avoid contamination of food. KEEP OUT OF REACH OF CHILDREN.

Container Disposal: 

Triple rinse container and discard according to local regulations.

Spill Or Leakage Procedures: 

Contain spill. Keep out of surface waters & any sewers or water courses entering or leading to surface waters. Soak up with inert absorbent & place in properly labeled leak-proof containers for disposal Dispose of in accordance with all local, state and federal regulations.

CAS NUMBERS: Aliphatic Petroleum Distillate 8052-41-3; 1-Bromopropane 106-94-5.

HMIS RATING: Health-2; Flammability-1; Reactivity-0; Personal Protection-B.